XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Seat Belt: Service and Repair
End Mounting, Replacing
End mounting, replacing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
This section contains methods for:
-
the end mounting for the front seat. See: replacing
-
the end mountings for the seats in the second row. See: replacing
-
the end mounting for the third row. See: replacing.
End mounting front, replacing
Removing front end mountings
Move the front seat as far forward as possible.
Remove the side panel. See: Side panel, replacing (-2004) or: Side panel front seat, replacing See: Body and Frame/Seats/Service and Repair/Removal
and Replacement/Front Seat, Driver's Seat, Front Seat/Side Panel Front Seat, Replacing (2005-).
Note! Use a weatherstrip tool to disconnect the seat belt from the end mounting. Carefully press the locking tab, as illustrated.
Remove the screw from the seat. Remove the end mounting.
Installing front end mountings
Note! For tightening torques, see Specifications See: Body and Frame/Specifications.