XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Install:
-
the end mounting
-
the M10 screw. Tighten.
Press the seat belt into the end mounting.
Note! A clear click is heard when the seat belt has locked correctly with the end mounting.
Note! Also check that the seat belt has locked correctly with the end mounting by looking at the reverse of the end mounting.
A= Correctly locked position.
B= If the lock facing does not lock correctly with the end mounting, see A, replace the end mounting with anewone.
Note! Check that the seat belt is secure by jerking it hard in an upwards direction.
Reinstall the side panel. See: Side panel, replacing (-2004) or: Side panel front seat, replacing See: Body and Frame/Seats/Service and Repair/Removal
and Replacement/Front Seat, Driver's Seat, Front Seat/Side Panel Front Seat, Replacing (2005-).
End mountings rear (second row), replacing
Removing rear end mountings (second row)