XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Remove:
-
the end mounting. See End mounting, replacing See: End Mounting, Replacing
-
the B-post panel. See Panel B-post, replacing See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Panel B-Post,
Replacing
-
the connector
-
the three screws
-
the clip for the mounting for the SRS ignition cable in the bracket
-
the bracket for the seat belt and seat belt (inertia) reel.
Installing front seat belts
Install:
-
the bracket for the seat belt
-
the 3 screws. Tighten. See
-
the connector
-
the B-post panel. See Panel B-post, replacing See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Panel B-Post,
Replacing
-
the end mounting. See End mounting, replacing See: End Mounting, Replacing
Check the function of the seat belt. See Seat belt function, check See: Testing and Inspection.
Carry out a final inspection. See Supplementary restraint system (SRS), inspection See: Testing and Inspection.