XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Remove:
-
the C-post panel. See Panel C-post, replacing See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Panel C-Post,
Replacing
-
the side panel. See Side panel cargo compartment, replacement See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and
Repair/Side Panel Cargo Compartment, Replacement
-
one screw from the bracket for the seat belt (inertia) reel
-
the bracket for the seat belt (inertia) reel by unhooking it
-
the connector
-
one screw from the upper mounting
-
the end mounting. See End mounting, replacing See: End Mounting, Replacing.
Thread the seat belt out of the C-post panel.
Installing the rear seat belt (second row)
Note! For tightening torques, see See: Body and Frame/Specifications
Install:
-
the seat belt reel and bracket
-
the connector
-
the bracket for the seat belt (inertia) reel by hooking it into place
-
1 M10 screw. Tighten
-
the upper mounting
-
1 M10 screw for the upper mounting. Tighten.
Insert the seat belt through the C-post panel.
Install: