XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
the three screws.
-
the rear section from the backrest frame
-
one screw for the end mounting
-
one screw for the upper seat belt mounting
-
one screw for the seat belt reel.
Disconnect the connector.
Remove the seat belt (inertia) reel.
Installing the center rear seat belt (second row)
Note! For tightening torques, see See: Body and Frame/Specifications
Install:
-
the connector
-
the seat belt reel
-
1 screw. Tighten. See See: Body and Frame/Specifications
-
the upper seat belt anchorage
-
1 screw. Tighten. See See: Body and Frame/Specifications
-
the end mounting
-
1 M10 screw. Tighten
-
the rear section
-
the 3 screws. Tighten
-
the upholstery for the backrest frame. See Upholstery backrest cushion center (second row), replacing See: Body and Frame/Seats/Seat
Cover/Service and Repair/Rear Seat, Passenger Seat, Seat/Upholstery Backrest Cushion Center (Second Row), Replacing.
Lift the seat into the car.