Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Arm/Disarm Switch, Antitheft > Component Information > Diagrams > Diagram Information and Instructions > Page 2602

Page 56
background image

Use tool 951 2637 Terminal removal tool See: Tools and Equipment/951 2637 Terminal Removal Tool to remove the primary lock, as illustrated.
At the same time pull the cable carefully backwards.

Connector, assembling

Primary locking

Check that the catches for the cable terminal are undamaged.
Press the cable terminal into the housing.
Check that the cable terminal is properly locked by pulling carefully on the cable.

Secondary locking

Press the secondary lock into place.

Connector Type 2

Connectors, repair

Special tools: 951 2632 Terminal removal tool See: Tools and Equipment/951 2632 Terminal Removal Tool , 951 2633 Terminal removal tool See:
Tools and Equipment/951 2633 Terminal Removal Tool , 951 2639 Terminal removal tool See: Tools and Equipment/951 2639 Terminal Removal Tool
, 951 2852 Terminal removal tool See: Tools and Equipment/951 2852 Terminal Removal Tool , 951 2853 Terminal removal tool See: Tools and
Equipment/951 2853 Terminal Removal Tool 

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Arm/Disarm Switch, Antitheft > Component Information > Diagrams > Diagram Information and Instructions > Page 2602

[PREV PAGE] [NEXT PAGE]