volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 6
background image

-

Cut away the corner on the plastic foam acc. to the illustration.

-

Done on both sides.

-

Localize the markings where the plastic foam was removed.

-

Saw out acc. to the markings with a keyhole saw. At the top edge the slot shall be sawed through the outer casing, plastic foam and inner casing at
the same time.

-

Repeat the step on the car's other side.

-

Remove the headlight washer on both sides by removing the clip (1) and screws (2).

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Parking Assist Distance Sensor > Component Information > Service and Repair > Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing > Page 2717

< PREV PAGE NEXT PAGE >