volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 7
background image

-

Mark out where the quick-coupling is located in relation to the bumper casing.

-

Remove the headlight washers with hoses.

-

Part outer and inner casing by loosening the 8 catches at the same time as the casings are pulled apart, and continue to pull apart the casings until
all catches release.

-

Localize the 2 markings on the outside of the inner casing's right and left side.

-

Saw out the slots with a keyhole saw.

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Parking Assist Distance Sensor > Component Information > Service and Repair > Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing > Page 2718

< PREV PAGE NEXT PAGE >