Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Parking Assist Distance Sensor > Component Information > Service and Repair > Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing > Page 2722

Page 11
background image

-

Fold the backrest forward and push the seat as far forward as possible. On cars with two rows of seats the the seat cannot be pushed forward.

-

Remove both rear panels (1) by pulling them straight up.

-

Remove the screws.

-

Lift out the seat.

Caution! Exercise care when doing this so that the trim or door panels are not damaged.

-

Loosen the upper part of the sill moulding on the rear edge and loosen the seat belt from the end fitting. The belt is loosened by carefully pressing
with a weatherstrip tool on the lock lug so that the seat belt releases from the end fitting.

-

Pull the sill moulding upwards until the 3 clips release.

-

Angle the sill moulding out from the B-post panel.

Sensors and Switches > Sensors and Switches - Accessories and Optional Equipment > Parking Assist Distance Sensor > Component Information > Service and Repair > Back-Up (Reversing) Warning Sensor (Parking Assistance Module (PAM)), Replacing > Page 2722

[PREV PAGE] [NEXT PAGE]