Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Acceleration/Deceleration Sensor > Component Information > Technical Service Bulletins > ABS/TCS - Sensor Cluster DTC Diagnosis > Page 2844

Page 3
background image

B.

DTC: BCM 0127 / C111464 - Angle of lean sensor. Signal outside its permitted range

These DTC's can be set while driving in rather sharp curve at an angle, usually at 20 mph (30 kph) at low engine load, while the steering wheel is
held at the same position throughout the curve.

If these DTC's are seen: Perform a BCM software upgrade.

Note!

For MY 05, replace the BCM as well as perform a BCM upgrade.

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Acceleration/Deceleration Sensor > Component Information > Technical Service Bulletins > ABS/TCS - Sensor Cluster DTC Diagnosis > Page 2844

[PREV PAGE] [NEXT PAGE]