Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Brake Fluid Pressure Sensor/Switch > Component Information > Locations > Page 2859

Page 1
background image

Brake Fluid Pressure Sensor/Switch: Service and Repair

Pressure sensor, master cylinder, replacing

Preparations for replacing the pressure sensor on the master cylinder
(5-cylinder naturally aspirated engine) 
Remove the air cleaner (ACL) and preheating hose, see: See: Brake Fluid Level Sensor/Switch/Service and
Repair

Left-hand drive,

Cars with turbocharger (TC):

Remove the air hose between the air cleaner (ACL) and the turbocharger (TC).
Remove the relay box.

Removal

Preparations for checking the pressure sensor

Turn on the ignition.
Press the dynamic stability and traction control (DSTC) button on the dashboard (the green lamp lights in the button) so that the DSTC system is
engaged.

Checking pressure sensor

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Brake Fluid Pressure Sensor/Switch > Component Information > Locations > Page 2859

[PREV PAGE] [NEXT PAGE]