Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


XC90 FWD L6-3.2L VIN 98 B6324S (2007)

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Pulse Wheel Drive Shaft, Replacing

Page 1
background image

Wheel Speed Sensor: Service and Repair
Pulse Wheel Drive Shaft, Replacing

Pulse wheel drive shaft, replacing

Special tools:

999 5695 Socket See: Tools and Equipment/999 5695 Socket 

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.

Preparation

Remove the drive shaft. See Replacing the front right drive shaft See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair/Drive Shaft Right, Replacing or Replacing the front left drive shaft See: Transmission and Drivetrain/Drive Axles,
Bearings and Joints/Axle Shaft Assembly/Service and Repair/Drive Shaft Left, Replacing.

Removing the pulse wheel

Secure the drive shaft in a vise with soft jaws.
Tap off the pulse wheel using a hammer and a cold chisel.

Installing the pulse wheel

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Pulse Wheel Drive Shaft, Replacing

[PREV PAGE] [NEXT PAGE]