XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Note! Pay close attention to the bushing's position in the link arm.
Installing the front bushing, continued
Use 999 7211 Drift See: Tools and Equipment/999 7211 Drift and place the bushing in the drift. The side of the bushing's stub axle, that has the smaller
of the plane surfaces, shall be facing the screw hole. Install one of the screws for the bushing loosely through the drift's hole.
Installing the front bushing, continued
Align the drifts so that the screw ends up directly opposite casting joint on the link arm.
Use 999 7210 Socket See: Tools and Equipment/999 7210 Socket and turn it with the hole centered in the same direction as the screw/casting joint.
Carefully press in the bushing until the threaded hole in the bushing's shaft can be seen through the sleeve's hole.
Installing the front bushing, continued
