XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Lift the control arms so that the screw for the control arm and lateral link can be installed. Align the screw. Tighten by hand. Do not tighten yet.
Lower the tensioner. Install the screw in the lower mounting for the shock absorber. Do not tighten yet.
Tension the control arms to the normal position. See Tensioner 999 5659, User instructions See: Service and Repair/User Instructions.
Tighten the screws for the control arm, lateral link and shock absorber. M12
Fit the cross stay to the wheel spindle with a new M12 lock nut. Tighten.
Only cars with Bi-Xenon lamps
Install the position sensor for Bi-Xenon lamps. See Position sensor Bi-Xenon lamps, replacing, TF-80SC AWD, AW50/51 AWD, M66 AWD See:
Lighting and Horns/Headlamp/Headlamp Alignment Sensor/Service and Repair.
Finishing
Remove the tensioner according to: Tensioner 999 5659, User instructions See: Service and Repair/User Instructions.
Install the wheel. See: Installing wheels See: Wheels and Tires/Wheels/Service and Repair.
Check and adjust the headlights' alignment according to: Headlamps, aligning See: Lighting and Horns/Headlamp/Adjustments
