XC90 FWD L6-3.2L VIN 98 B6324S (2007)
-
connectors to engine control module (ECM)
-
the connector for the mass airflow sensor (MAF)
-
air cleaner.
Before filling
Warning! Avoid skin contact with the specified material.
Warning! Be prepared to collect escaping fluids.
Caution! Ensure that equipment and tools are clean and free from contaminants and lubricant.
Remove the filler plug (TORX 55).
Lower a filler nozzle or a hose with funnel into the filler hole.
Installing the air cleaner (ACL)
Put in place temporarily:
-
air filter for air bellows
-
connectors to engine control module (ECM)
-
connector for mass airflow sensor.
Check
Basic fluid level check
Start the engine.
Note! Leave the engine running during the entire check.
Note! The following measure must be carried out quickly to avoid overheating the fluid.
Run through all the positions between P and D on the gear selector. Stop at each position for at least 2 seconds. Perform this process twice.
Place the gear selector in position P.