XC90 FWD L6-3.2L VIN 98 B6324S (2007)
Raise the vehicle and place a receptacle under the gearbox.
While the engine is running, remove the integrated level plug (Torx 40).
If there is no transmission fluid coming out of the level plug hole, top up until it starts to drop.
Fit the integrated level plug (Torx 40) by hand. Reuse the old O-ring.
Switch off the engine.
To prevent the temperature exceeding the measuring interval in the next measure, top up with 0.5 liters of transmission fluid as follows.
Finishing
Installing the filler plug
Fit the filler plug (TORX 55). Use a new O-ring. Moisten the new O-ring with transmission fluid and tighten according to: See:
Specifications/Mechanical Specifications/Tightening Torque
Installing the air cleaner (ACL)