Workshop Repair Manuals

Yugo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

yugo Workshop Repair Guides


Yugo L4-1300cc 1.3L (1991)

Brakes and Traction Control > Hydraulic System, Brakes > Brake Master Cylinder > Component Information > Service and Repair > Removal/Installation

Page 1
background image

Brake Master Cylinder: Service and Repair
Removal/Installation

1.

Remove spare tire from engine compartment.

2.

Remove fluid reservoir cover and plug outlet.

3.

Disconnect tubes from reservoir to master cylinder.

4.

Disconnect brake lines at master cylinder.

5.

Remove master cylinder attaching nuts and the master cylinder.

6.

Reverse procedure to install. Torque master cylinder attaching nuts to 18.5 ft. lbs.

Brakes and Traction Control > Hydraulic System, Brakes > Brake Master Cylinder > Component Information > Service and Repair > Removal/Installation

[PREV PAGE] [NEXT PAGE]