Yugo Workshop Manuals
Yugo L4-1300cc 1.3L (1991)
Transmission and Drivetrain > Automatic Transmission/Transaxle > Component Information > Technical Service Bulletins > Technical Service Bulletins for Automatic Transmission/Transaxle: > ATRATB8748 > Aug > 87 > A/T - Slipping or No-Shift/Metal Sealing Rings > Page 794
Place ring in bore of drum where they will be running. (See Figures 1 & 2)
Sealing rings should be snug in bore; rings should fit all around the drum. (drum could be out-of-round)
Air check all drums. (Use 30 PSI air pressure only.) If air escapes you have leaks -- better find now, than later. This represents lost clutch pressure,
Following these steps will help you save money, plus help you build better units.
|[PREV PAGE] [NEXT PAGE]|