TL FWD V6-3.5L (2009)
4. Connect the dashboard wire harness 4P connector (A) to the front passenger's airbag, then reinstall the glove box. See: Body and Frame/Interior
Moulding / Trim/Glove Compartment/Service and Repair/Glove Box Removal/Installation
5. Do the battery terminal reconnection procedure. See: Starting and Charging/Battery/Service and Repair/Procedures
6. Clear any DTCs. See: Testing and Inspection/Initial Inspection and Diagnostic Overview
7. After installing the airbag, confirm proper system operation: Turn the ignition switch to ON (II), or press the engine start/stop button to select the
ON mode; the SRS indicator should come on for about 6 seconds and then go off.