TL FWD V6-3.5L (2009)
Air Bag: Removal and Replacement
Side Airbag Replacement
Side Airbag Replacement
NOTE: If replacing the side airbag after deployment, refer to Component Replacement/Inspection After Deployment See: Service and Repair for a
complete list of other parts that must also be replaced.
Removal
1. Do the battery terminal disconnection procedure, See: Starting and Charging/Battery/Service and Repair/Procedures then wait for 3 minutes
before starting work.
2. Remove the seat assembly. See: Body and Frame/Seats/Service and Repair/Front Seat Removal/Installation
3. Detach the clips (A) and harness holder (B) of side airbag harness from the seat frame.
4. Pull out the seat-back cover/pad as needed. See: Body and Frame/Seats/Seat Cover/Service and Repair/Front Seat-Back Cover Replacement
5. Release the reinforcing cloth rear hooks (A) from the seat-back frame (B).
6. Remove the two mounting nuts (C) and the side airbag (D).
Installation
NOTE:
-
If the side airbag lid is secured with tape, remove the tape.
-
Do not open the lid on the side airbag cover.
-
Use new mounting nuts tightened to the specified torque.