Audi Workshop Service and Repair Manuals

No provision is made for servicing vacuum pump for brake -V192. In the event of a fault, vacuum pump for brake -V192 must be replaced.

Removing

• ‒ → Screw out bolts -1- at bracket for vacuum pump on left of subframe.
• ‒ Pull vacuum hose -arrow- off vacuum pump.
• ‒ Unplug connector.
• ‒ Take out vacuum pump for brake -V192.

• ‒ → To remove bracket -arrow- screw nut -2- off bolt -1-.
• ‒ Screw out bolt -4- and detach bracket.
• ‒ To further dismantle bracket -arrow- screw out bolts -3-.

Installing

Install in reverse order.

Tightening torques