A3 Mk1
| Exploded view - hydraulic system |
| 1 - | Brake fluid reservoir |
| 2 - | Supply hose |
| 3 - | Master cylinder |
| q | Removing and installing → Chapter |
| 4 - | Retaining clip |
| q | Renew only when master cylinder has been removed |
| q | Removing → Fig. |
| q | Pressing on → Fig. |
| 5 - | Clutch pedal |
| q | Removing and installing on LHD vehicles → Chapter |
| 6 - | Nut |
| q | 25 Nm |
| q | Self-locking |
| q | Always renew |
| 7 - | Bracket |
| q | Secure to support bracket → Item |
| 8 - | Pipe/hose assembly |
| q | Allocation for LHD and RHD vehicles → Electronic parts catalogue |
| 9 - | Support bracket |
| 10 - | Dust cap |
| 11 - | Bleeder valve |
| q | Bleeding clutch system → Chapter |
| 12 - | Slave cylinder |
| q | Removing and installing → Chapter |
| 13 - | Bolt |
| q | 23 Nm |
| 14 - | Gearbox |
| 15 - | Retaining clip |
| q | Pull out retaining clip to disconnect pipe → Anchor |
| 16 - | Clip |
| q | Secured on body |
| 17 - | Pipe/hose assembly |
| q | Allocation for LHD and RHD vehicles → Electronic parts catalogue |
| 18 - | Pipe connection (plug-in type) |
| 19 - | O-rings |
| q | Push onto pipe connection |
| q | Lubricate with brake fluid before installing |
| 20 - | Retaining clip |
| q | Pull out retaining clip to disconnect pipe → Anchor |
|
|
|
|
