Cabriolet V6-2.8L (AFC) (1995)
Axle Beam: Service and Repair
Guide Bearing (Bushing) Replacement, Axle Installed
ALL VEHICLES
-
Install brake pedal support.
-
Disconnect brake lines from brackets on both sides.
-
Plug brake line connections using rubber caps from brake caliper bleeder screws.
VEHICLES WITH BRAKE PROPORTIONING VALVE
-
Disconnect brake proportioning valve from bearing mounting bracket.
-
Remove regulator spring mounting bolt from lever on brake proportioning valve.
-
Carefully press brake proportioning valve slightly toward center of vehicle.
-
Remove axle mounting bolts on both sides of bearing mount.
-
Press axle downward so special tool 3294 can be installed.
ALL VEHICLES
-
Install assembly device 3294 as shown.
-
Press guide bearing out of rear axle by turning tool spindle.
-
Remove assembly device 3294.