In-vehicle Repair Special Tool(s) | Remover, Installer, Vibration Damper, Crankshaft 303 - 130 (21 - 076) | | Installer/Aligner, Oil Seal, Timing Cover 303 - 055 (21017A) | | Remover, Oil Seal, Timing Cover 303 - 112 (21051) | Materials Name Specification Hypoidoil SQM - 2C9002 - AA Removal | -
Remove the crankshaft pulley. For additional information, refer to Crankshaft Pulley in this section. | | -
CAUTION:Protect the crankshaft surface when removing the oil seal. Using the special tool, remove the crankshaft front oil seal. | Installation | -
NOTE:Use the washer of the crankshaft pulley bolt for installation. Using the special tools, install the crankshaft front oil seal. - Coat the outer ring and the sealing lip of the oil seal with Hypiodoil .
| | -
Install the crankshaft pulley. For additional information, refer to Crankshaft Pulley in this section. | | |