ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Transaxle Rear Support Insulator - 2.0L > < Transaxle RH Support Insulator

Cougar 1999 (08.1998-01.2001)

Manual Transmission/Transaxle - Transaxle Rear Support Insulator—2.5L Cougar 1999 (08/1998-01/2001)
In-vehicle Repair

Special Tool(s)

Support Bar, Engine

303 - 290 (21140)

Adaptor for 303 - 290

303 - 290 - 01 (2114001)

Adaptor for 303 - 290

303 - 290 - 02 (2114002)

Adaptor for 303 - 290

303 - 290 - 03 (2114003)

Removal

  1. NOTE:
    NOTE:The locations of the engine mountings and engine support insulators are described looking from the transaxle to the engine.
    Remove the air cleaner (ACL). For additional information, refer to Section  303-12B .

  1. Remove the water pump pulley cover.
    1. Disconnect the hose from the clip.
    1. Remove the bolts.
    1. Remove the cover.

  1. Remove the air cleaner bracket.
    1. Remove the bolts.
    1. Remove the bracket.

  1. Install the special tools.

  1. Remove the support insulator.
    1. Remove the nuts.
    1. Remove the bolts.
    1. Remove the insulator.

Installation
  1. NOTE:
    NOTE:Use new self - locking nuts.
    To install, reverse the removal procedure.

Transaxle Rear Support Insulator - 2.0L > < Transaxle RH Support Insulator