ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
In-vehicle Repair|Removal > < Transaxle Rear Support Insulator - 2.5L

Cougar 1999 (08.1998-01.2001)

Manual Transmission/Transaxle - Transaxle Rear Support Insulator—2.0L Cougar 1999 (08/1998-01/2001)
In-vehicle Repair

Special Tool(s)

Support Bar, Engine

303-290 (211140)

Adaptor for 303-290

303-290-01 (2114001)

Adaptor for 303-290

303-290-02 (2114002)

Adaptor for 303-290

303-290-03 (2114003)

Removal

  1. NOTE:
    NOTE:The locations of the engine mountings and engine support insulators are described looking from the transaxle to the engine.
    Remove the air cleaner (ACL) . For additional information, refer to Section  303-12C .

  1. Install the special tool.

  1. Remove the air cleaner bracket.
    1. Remove the bolts.
    1. Remove the bracket.

  1. Remove the support insulator.
    1. Remove the through bolt.
    1. Remove the bolts.
    1. Remove the insulator.

Installation
  1. NOTE:
    NOTE:Use new self-locking nuts.
    To install, reverse the removal procedure.

In-vehicle Repair|Removal > < Transaxle Rear Support Insulator - 2.5L