ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3137 > < Initial Inspection and Diagnostic Overview|Page 3135
Page 20
background image

-

Is the resistance less than 5 ohms?

Yes

GO to G3. 

No

REPAIR the circuit. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.

-------------------------------------------------
G3 CHECK THE HS-CAN CIRCUITS BETWEEN THE TBC MODULE AND THE DLC FOR AN OPEN

 

-

Measure the resistance between the TBC module C2142-10, circuit VDB04 (WH/BU) or HSC1-A (WH/BU), harness side and the Data Link
Connector (DLC) C251-6, circuit VDB04 (WH/BU), harness side.

Initial Inspection and Diagnostic Overview|Page 3137 > < Initial Inspection and Diagnostic Overview|Page 3135