ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Selector Lever Bezel > < Selector Lever Cable

Focus 1999 (08.1998-12.2004)

Automatic Transmission/Transaxle External Controls - Vehicles With: 4F27E - Selector Lever Focus 1999 (08/1998-12/2004)
Removal and Installation

Removal

  1. Remove the floor console. For additional information, refer to Section  501-12 Instrument Panel and Console.

  1. Remove the selector lever cable from the selector.
    1. Shift the selector lever to "P".
    1. Unclip the selector lever cable.
    1. Unclip the selector lever cable outer sleeve.

  1. Disconnect the selector lever assembly electrical connector.

  1. Remove the selector lever assembly.
    • Remove the four nuts.

Installation
  1. NOTE:
    NOTE:Use thread locking compound for the nuts.
    Install the selector lever assembly.
    • Install the four nuts.

  1. Connect the selector lever assembly electrical connector.

  1. NOTE:
    NOTE:The selector lever has its own detent mechanism. Holding the selector lever is not necessary.
    Install the selector cable to the selector lever.
    1. Shift the selector lever to "P".
    1. Clip in the selector lever cable outer sleeve.
    1. Clip in the selector lever cable.
  1. Install the floor console. For additional information, refer to Section  501-12 Instrument Panel and Console.
  1. Re-adjust the system.
    For additional information, refer to Selector lever adjustment in this section.

Selector Lever Bezel > < Selector Lever Cable