ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Camshafts > < Crankshaft Front Seal

Focus 2004.75 (07.2004-)

Engine - 1.8L Duratorq-TDCi (Lynx) Diesel - Valve Seals Focus 2004.75 (07/2004-)
In-vehicle Repair

Special Tool(s)

Installer, Valve Stem Seal

303-037

Compressor, Valve Spring

303-060

Adapter for 303-060

303-060-05

Installer, Valve Stem Collets

303-362

Pliers, Valve Stem Seal

303-390
Materials
Name
Specification
Engine Oil - 5W-30
WSS-M2C912-A1 

Removal

  1. Remove the camshaft.
    For additional information, refer to: Camshafts (303-01F Engine - 1.8L Duratorq-TDCi (Lynx) Diesel, In-vehicle Repair).
  1. Position the apropriate piston at top dead center (TDC).

  1. Using the special tools, remove the valve springs.

  1. Using the special tool, remove the valve stem seals.

Installation
  1. NOTE:
    NOTE:Cover the collet grooves with adhesive tape during installation of the valve stem seals.
    Using the special tool, install the valve stem seals.
    • Coat the valve stem seals with clean engine oil.

  1. Using the special tools, install the valve springs.
  1. Install the camshaft.
    For additional information, refer to: Camshafts (303-01F Engine - 1.8L Duratorq-TDCi (Lynx) Diesel, In-vehicle Repair).

Camshafts > < Crankshaft Front Seal