ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Variable Camshaft Timing (VCT) Oil Control Solenoid - 1.6L Duratec-16V Ti-VCT (Sigma) > < Engine Coolant Temperature (ECT) Sensor - 1.8L Duratec-HE (MI4)-2.0L Duratec-HE (MI4)

Focus 2004.75 (07.2004-)

Electronic Engine Controls - Engine Coolant Temperature (ECT) Sensor—2.0L Duratorq-TDCi (DW) Diesel Focus 2004.75 (07/2004-)
Removal and Installation

  1. Drain the cooling system. For additional information, refer to Section  303-03A Engine Cooling / 303-03B Engine Cooling / 303-03C Engine Cooling / 303-03D Engine Cooling / 303-03E Engine Cooling / 303-03F Engine Cooling / 303-03G Engine Cooling.

  1. Remove the engine upper cover.
  1. Remove the battery tray. For additional information, refer to Section  414-01 Battery, Mounting and Cables.

4. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
Heater coolant hose to thermostat housing quick release coupling retaining clip
2
-
Heater coolant hose to thermostat housing quick release coupling
3
-
ECT sensor electrical connector
4
-
ECT sensor retaining clip
5
-
ECT sensor

5. To install, reverse the removal procedure.

Variable Camshaft Timing (VCT) Oil Control Solenoid - 1.6L Duratec-16V Ti-VCT (Sigma) > < Engine Coolant Temperature (ECT) Sensor - 1.8L Duratec-HE (MI4)-2.0L Duratec-HE (MI4)