Removal and Installation | -
Disconnect the battery ground cable. For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). | 2. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Variable camshaft timing (VCT) oil control solenoid 2 - VCT oil control solenoid retaining bolt 3. To install, reverse the removal procedure. | -
Initialize the door window motors. For additional information, refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures). | Installation Details Item 3 : VCT oil control solenoid | -
NOTE:Make sure that the VCT oil control solenoid and VCT oil control solenoid cylinder head open orifice are clean and free from any dirt ingress. Install the VCT oil control solenoid. | |