Removal and Installation Electric hand drill Blind rivet gun-hand Materials Name Specification Adhesive - Loctite 243 WSK-M2G349-A7 | -
Remove the front door window glass. For additional information, refer to: Front Door Window Glass (501-11 Glass, Frames and Mechanisms, Removal and Installation). | | -
Remove the front door window regulator motor. For additional information, refer to: Front Door Window Regulator Motor - Vehicles With: Global Closing (501-11 Glass, Frames and Mechanisms, Removal and Installation) / Front Door Window Regulator Motor - Vehicles With: Global Closing (501-11 Glass, Frames and Mechanisms, Removal and Installation). | | -
Disconnect the power window control switch electrical connector. | | -
Disconnect the door latch remote control cable from the door latch remote control. - Operate the door latch remote control handle lock to the lock position.
| | -
Remove the exterior front door handle. For additional information, refer to: Exterior Front Door Handle (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation). | 6. Remove the components in the order indicated in the following illustration(s) and table(s). 6 - Door inner panel retaining bolts 7. To install, reverse the removal procedure. Removal Details Item 2 : Door hinge center retaining bolts | -
CAUTION:Protect the door using a soft cloth to prevent damage. With the aid of another technician and a suitable trolley jack, support the door. | Item 3 : Door (left-hand door shown) | -
Detach the electrical connector from the A-pillar. | | -
Remove the front door. - Disconnect the electrical connector.
| | -
Push the front door wiring harness into the door. | Item 5 : Exterior mirror trim panel | -
Detach the exterior mirror trim panel from the door panel. - Detach the clips.
- Detach the trim panel.
- Disconnect the speaker electrical connector (if equipped).
| | -
Remove the exterior mirror trim panel. - Detach the mirror electrical connector from the trim panel.
- Disconnect the mirror electrical connector.
| Item 7 : Door inner panel | -
Remove the front door latch retaining screws. | | -
Remove the front door latch bracket retaining screws. | | -
Detach the exterior mirror wiring harness retaining clip. | Item 8 : Front door window regulator Installation Details Item 8 : Front door window regulator | -
Align the window regulator with the window regulator motor retaining screw holes and rivet holes in the door inner panel. | | -
Install the window regulator motor. | Item 2 : Door hinge center retaining bolts | -
Apply a coating of adhesive to the door hinge center retaining bolts. | |