Removal and Installation Removal Vehicles with 2.8L or diesel engine | -
Remove the engine cover. - Pull the engine cover from the engine cover front mountings.
- Pull the engine cover from the engine cover rear mounting and remove the engine cover.
| All vehicles CAUTION:Cap the refrigerant lines and the thermostatic expansion valve to prevent dirt ingress. | -
Disconnect the refrigerant lines from the thermostatic expansion valve. - Discard the O-ring seals.
| | -
Remove the thermostatic expansion valve. - Discard the O-ring seals.
| Installation | -
NOTE:Install new refrigerant line O-ring seals. NOTE:Lubricate the refrigerant line O-ring seals with clean refrigerant oil before installation. To install, reverse the removal procedure. | |