ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Rear Seat Backrest - Vehicles With: Integrated Child Safety Seat > < Rear Seat Cushion - Vehicles With: Integrated Child Safety Seat

Galaxy 2000.75 (04.2000-02.2006)

Seating - Rear Seat Backrest Galaxy 2000.75 (04/2000-02/2006)
Disassembly and Assembly

Disassembly

  1. Remove the head restraint.

  1. Remove the head restraint guides.
    • Using a suitable screwdriver, depress the locking tang.

  1. Detach the rear panel from the backrest.
    1. Remove the screw cover.
    1. Remove the screw.
CAUTION:
CAUTION:To avoid damage, the rear panel must only be lifted high enough to detach the retaining hooks.
  1. Remove the rear panel.
    1. Lift the rear panel up at the upper edge.
    1. Slide the rear panel towards the top of the seat.

  1. Detach the zip tracks from both sides of the backrest.

  1. Release the zip and roll back the backrest cover.

  1. Detach the seat cover tensioning wires from the front of the backrest.
    • Cut the hog rings.

  1. Remove the rear seat backrest.
    1. Roll the backrest cover upwards to access the pleating hog rings.
    1. Cut the hog rings.

Assembly
  1. NOTE:
    NOTE:Use hog ring pliers to close the hog rings. Do not use any other tool. The hog rings must be closed to overlap as illustrated.
    To assemble, reverse the disassembly procedure.

Rear Seat Backrest - Vehicles With: Integrated Child Safety Seat > < Rear Seat Cushion - Vehicles With: Integrated Child Safety Seat