ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Fuel Filter > < Fuel Pump Module

Puma 1998 (06.1997-12.2001)

Fuel Tank and Lines - Fuel Tank Filler Pipe Puma 1998 (06/1997-12/2001)
Removal and Installation

Removal

WARNING:
WARNING:Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and can ignite. Failure to follow these instructions may result in personal injury.
  1. Remove the fuel tank filler pipe retaining bolt.
  1. Remove the fuel filler cap.
  1. Loosen the rear left-hand wheel nuts.
  1. Remove the fuel tank.
    For additional information, refer to Fuel Tank in this section.
  1. Remove the rear left-hand wheel.

  1. Remove the fender splash shield.

  1. Remove the fuel tank filler pipe lower retaining bolt.
  1. Remove the fuel tank filler pipe.

Installation

  1. WARNING:
    WARNING:Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and can ignite. Failure to follow these instructions may result in personal injury.
    To install, reverse the removal procedure.

Fuel Filter > < Fuel Pump Module