Removal and Installation Special Tool(s) | 100-010 Remover, O-Ring Seal | | 303-376B Alignment Plate, Camshaft | General Equipment Removal | -
Refer to: Stirndeckel (303-01B Motor - 2.3L Duratec-HE (MI4), Removal and Installation). | | -
CAUTION:Counterhold the camshaft at the hexagon with a wrench to prevent the camshaft from rotating. | Installation | -
NOTE:The camshaft sprocket bolt must not be tightened at this stage. | | -
CAUTION:Only rotate the camshaft clockwise. Turn the camshafts to cylinder no. 4 valve overlap position. | | -
CAUTION:Counterhold the camshaft at the hexagon with a wrench to prevent the camshaft from rotating. Torque: 72 Nm | | -
Refer to: Stirndeckel (303-01B Motor - 2.3L Duratec-HE (MI4), Removal and Installation). | | |