ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Radiator > < Thermostat Housing

S-MAX.Galaxy 2006.5 (03.2006-)

Engine Cooling - 2.5L Duratec (VI5) - Cooling Fan Motor and Shroud S-MAX/Galaxy 2006.5 (03/2006-)
Removal and Installation

General Equipment
Cable ties

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. On both sides.

  1. Loosely secure the radiator and condenser assembly to the front panel so that it can be lowered by approximately 70 mm (on both sides).
    General Equipment: Cable ties

  1. Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

  1. Lower the radiator and condenser assembly by approximately 70 mm.
    Torque: 25 Nm

Installation

  1. To install, reverse the removal procedure.

Radiator > < Thermostat Housing