ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
303-08D Engine Emission Control - 2.0L Duratorq-TDCi (DW) Diesel > < Exhaust Gas Recirculation (EGR) Valve

S-MAX.Galaxy 2006.5 (03.2006-)

Engine Emission Control - 1.8L Duratorq-TDCi (Lynx) Diesel - Exhaust Gas Recirculation (EGR) Cooler S-MAX/Galaxy 2006.5 (03/2006-)
Removal and Installation

General Equipment
Hose clamp remover/installer

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.

  1.  
    1. Torque: 22 Nm
    1. Detach the A-pillar exterior trim panel lower clips.

  1.  
    1. Torque: 10 Nm

  1. CAUTION:
    CAUTION:Make sure that the inside of the pipe ends are clean and free of oil residue.
    NOTE:
    NOTE:Make a note of the orientation of the charger air cooler clamp.

  1. NOTE:
    NOTE:The gaskets are to be reused unless damaged.
    General Equipment: Hose clamp remover/installer

Installation
  1. NOTE:
    NOTE:Only tighten the nut and bolts finger tight at this stage.

  1.  
    1. Torque: 23 Nm
    1. Torque: 10 Nm
    1. Torque: 10 Nm
    1. Torque: 4 Nm
  1. To install, reverse the removal procedure.

303-08D Engine Emission Control - 2.0L Duratorq-TDCi (DW) Diesel > < Exhaust Gas Recirculation (EGR) Valve