| Removal and Installation Special Tool(s) | | Installer, Wheel Hub 204–148 (14–037) | | | Socket, Hub Nut 204–174 (14–049) | | | Remover/Installer, Ball Joint 204–288A (14–063A) | | | Remover/Installer, Rear Suspension Bushing 205–050 (15–014) | | | Installer, Timing Cover Oil Seal 303–427 (21–178) | Materials Name Specification Silicone Grease ESE-M1C171-A Removal | | -
Remove the lower arm.
For additional information, refer to: Lower Arm (204-01 Front Suspension, Removal and Installation).
| | | -
Secure the lower arm in a vise. | | | -
Using a suitable knife, remove the rubber ends of the lower arm horizontal bushing. | | | -
Using the special tools, remove the lower arm horizontal bushing. | | | -
Remove the lower arm from the vise. | | | -
Using the special tools, remove the lower arm vertical bushing. | Installation | | -
Using the special tool, install the lower arm vertical bushing. | | | -
Secure the lower arm in a vise. | | | -
Lubricate the lower arm horizontal bushing with grease. | | | -
Using the special tools, install the lower arm horizontal bushing. | | | -
Install the lower arm.
For additional information, refer to: Lower Arm (204-01 Front Suspension, Removal and Installation).
| | | -
Check the toe setting and adjust as necessary. For additional information, refer to: (204-00 Suspension System - General Information) Specifications (Specifications), Front Toe Adjustment (General Procedures). | | |
