ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Parking Brake Front Cable > < Parking Brake Cable Adjustment - Vehicles With: Rear Disc Brakes
Parking Brake and Actuation - Parking Brake Control Transit 2006.5 (04/2006-)
Removal and Installation

Removal

  1. Release the parking brake.

  1. Remove the parking brake control boot.
  1. Raise and support the vehicle.
    For additional information, refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

  1. Loosen the parking brake cable adjustment nut.
  1. Lower the vehicle.

  1. Disconnect the parking brake warning indicator switch electrical connector (if equipped).

  1. Detach the front parking brake cable from the parking brake control.

  1. Detach the front parking brake cable from the parking brake control bracket.
  1. Slide the driver seat forwards.

  1. Slide the battery cover forwards.

  1. Remove the parking brake control.

Installation

  1. To install, reverse the removal procedure.
  1. Adjust the parking brake. For additional information, refer to: (206-05A Parking Brake and Actuation)
    Parking Brake Cable Adjustment - Vehicles With: Rear Drum Brakes (General Procedures),
    Parking Brake Cable Adjustment - Vehicles With: Rear Disc Brakes (General Procedures).

Parking Brake Front Cable > < Parking Brake Cable Adjustment - Vehicles With: Rear Disc Brakes