ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
High-Pressure Cutoff Switch > < Low-Pressure Cutoff Switch

Transit 2006.5 (04.2006-)

Air Conditioning - Condenser Core Transit 2006.5 (04/2006-)
Removal and Installation

Materials
Name
Specification
Refrigerant Oil
WSH-M1C231-B
General Equipment
Cable ties

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Drain the air conditioning system.
    Refer to: Klimaanlage entleeren, evakuieren und befüllen (412-00, General Procedures).
  1. Remove the front bumper cover.
    Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation).
  1. Secure the radiator using cable ties.
    General Equipment: Cable ties

  1. CAUTION:
    CAUTION:Make certain that all openings are sealed.
    Torque: 8 Nm

  1. Raise the vehicle for access.
    Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

  1. Torque: 25 Nm

Installation

  1. To install, reverse the removal procedure.
  1. Coat the O-rings for the refrigerant lines with clean refrigerant oil.
    Material: Refrigerant Oil

High-Pressure Cutoff Switch > < Low-Pressure Cutoff Switch