Removal and Installation Removal WARNING:Refer to: Supplemental Restraint System (SRS) Health and Safety Precautions (100-00 General Information, Description and Operation). NOTE:Removal steps in this procedure may contain installation details. | -
Disconnect the battery ground cable. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). | | -
CAUTION:Make sure that the component is correctly located. Torque: 9 Nm | Installation | -
To install, reverse the removal procedure. | | -
WARNING:New restraint control modules must be configured following installation. Configure the restraint control module. Refer to: Module Configuration (418-01 Module Configuration, General Procedures). | | |