L322 Range Rover Service Procedures
REAR SUSPENSION
REPAIRS
64-9
2. Position anvil, LRT-60-033/10 to bed of
hydraulic press and locate hub on anvil.
3. Ensure hub and bearing mating surfaces are
clean and dry.
4. Apply stud/bearing fit, STC 50553 to bearing
mating surface in hub for half its length.
5. Press bearing into hub using adapter LRT-60-
033/12.
6. Fit new circlip.
7. Clean backplate and mating face, fit backplate
and fit and tighten bolts.
8. Fit bearing support, LRT-60-033/11 to anvil,
and press flange into bearing using adapter
LRT-60-033/12.
9. Remove tools.
10. Fit hub assembly.
