L322 Range Rover Service Procedures
REAR SUSPENSION
REPAIRS
64-7
Refit
1. Clean ball joint and location in hub.
2. Fit ball joint with circlip groove facing towards
rear using LRT-64-026/3 with LRT-64-026/2.
3. Fit new circlip.
4. Fit bolt securing brake disc backplate.
5. Clean lower arm and hub mating faces.
6. Align hub to lower arm, fit new nut and bolt and
tighten to 250 Nm (184 lbf.ft).
7. Fit tie rod.
8. Check wheel alignment.
Bearing(s) - hub
$% 64.15.14
Remove
1. Remove hub assembly.
2. Remove 4 bolts securing backplate to hub.
3. Fit adapter, LRT-60-033/5 to drive flange.
M64 0205