L322 Range Rover Service Procedures
REAR SUSPENSION
64-10
REPAIRS
Air spring
$% 64.21.01
It is not necessary to depressurise the whole system,
only the side from which the air spring is being
replaced.
Do not depressurise air suspension system before
raising vehicle
When removing Voss connectors from any air
suspension component, the connector must be left
attached to the air pipe being removed. Do not
remove the connector from the air pipe. Removing
the connector from the air pipe could cause the
connector to scratch the pipe and increase the
likelihood of leaks.
Remove
1. Raise rear of vehicle and support under body.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Remove road wheel.
3. Remove clip from upper mounting.
4. Remove screw securing spring to lower arm.
5. Depressurise air spring being replaced.
ADJUSTMENTS, Suspension - depressurise
and repressurise.
6. Remove bolt securing damper to lower arm.
7. Release damper from lower arm.
8. With assistance, lower suspension arm and
release spring for access to air pipe
connection.
CAUTION: Do not extend or compress air
spring.
9. Disconnect air pipe.
CAUTION: Before disconnecting or
removing components, ensure the
immediate area around joint faces and
connections are clean. Plug open
connections to prevent contamination.
10. Remove air spring assembly.
M64 0185