L322 Range Rover Service Procedures
REAR SUSPENSION
REPAIRS
64-19
7. Align damper to lower arm, fit through bolt and
tighten to 110 Nm (81 lbf.ft).
8. Tighten bolts securing lower arm to subframe to
165 Nm (121 lbf.ft).
9. Pressurise suspension.
ADJUSTMENTS, Suspension - depressurise
and repressurise.
10. Align height sensor link to lower arm, fit nut and
bolt and tighten to 19 Nm (14 lbf.ft).
11. Fit anti-roll bar link.
REAR SUSPENSION, REPAIRS, Link
12. Remove stands and lower vehicle.
Arm assembly - upper
$% 64.35.60
Do not depressurise air suspension system before
raising vehicle
Remove
1. Remove exhaust system.
- Td6, REPAIR, Exhaust system and
mountings.
2. Raise rear of vehicle and support under body.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
3. Remove road wheel.
4. Depressurise rear suspension.
ADJUSTMENTS, Suspension - depressurise
and repressurise.
5. Release ABS sensor lead from upper arm.
6. Remove 2 Allen screws securing brake pipe.
M64 0188