seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing the sealing flange with the sender wheel from the crankshaft > < F -To re-adjust the sender wheel

Leon Mk2

Crankshaft sealing flange, on the flywheel side: Replace (Assembly toolT10017)
Crankshaft sealing flange, on the flywheel side: Replace (Assembly tool -T10017-)
  Note
t  Note that different types of sealing flange are used → ETKA (electronic parts catalogue)
t  The respective untended assembly tool must be used for each sealing flange → Chapter
Check the tool and equipment equivalence table according to the applicability between Seat / VW / Audi / Skoda → Chapter
   
Special tools and workshop equipment required
t  Centre guide -T10017-, see equivalent → Anchor
t  Tightening torque -VAG 1331-, see equivalent → Anchor
t  Wrench e/c 24 -VAG 1332/11-, see equivalent → Anchor
t  Three hexagonal bolts M6 x 35 mm
t  Calibre
t  Dial calliper

   

Removing the sealing flange with the sender wheel from the crankshaft > < F -To re-adjust the sender wheel