Bleeding the brake system without the brake filling/bleeding apparatus |
–
| Depress brake pedal to pressurise the system. |
–
| Open the bleeding screw with the flexible hose of the bleeding bottle attached. |
–
| Close the bleeding screws with the pedal fully depressed. |
–
| Repeat the procedure until no more air comes out. |
1 - Rear right wheel brake cylinder/brake caliper |
2 - Rear left wheel brake cylinder/brake caliper |
3 - Front right brake caliper |
4 - Front left brake caliper |
–
| After having bled the air, a test run must be carried out. During this test run, at least one ABS activation must take place. |
|
|
|