Fabia Mk2
Summary of front bumper components |
1 - | Front bumper |
Removing: |
– | Switch off the ignition and all electrical components. |
– | Partly remove front wheelhouse liner → Chapter. |
– | Lever out cover parts (Pos. 4 and 8). |
– | Remove screws (Pos. 2). |
– | Remove screws (Pos. 3). |
– | Remove expanding rivets (Pos. 6). |
– | Remove screws (Pos. 5 and Pos. 7). |
– | Remove bumper to the front. |
Note
Before removing the bumper it is necessary to disconnect plug of fog lights, of park sensors and of hoses for the headlight cleaning system (if present). |
Installing: |
– | Installation is carried out in the reverse order. |
2 - | 3.5 Nm |
3 - | 1 Nm |
4 - | Left cover part |
Removing: |
– | Release cover part with device e.g. disassembly wedge -3409-. |
Installing: |
– | Carefully lock cover part into position in the bumper. |
5 - | 1.5 Nm |
6 - | Body-bound rivet |
7 - | 1.5 Nm |
8 - | Right cover part |
Removing: |
– | Release cover part with device e.g. disassembly wedge -3409-. |
Installing: |
– | Carefully lock cover part into position in the bumper. |
9 - | Left cap |
10 - | Right cap |