skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing the central pipe > < Removing and installing the dash panel

Yeti

Removing and installing passenger glove compartment
Removing and installing passenger glove compartment
  WARNING
Disconnect battery earth strap → Electrical System; Rep. gr.27.
Removing:
   
–  Place a screwdriver under the opening handle in -direction of arrow A- and unlock the catch peg in -direction of arrow B-.
–  Push out the opening handle in -direction of arrow C-.
  S70-0492
–  Remove screws -3-.
–  Pull the glove compartment -2- out of the dash panel.
–  Disconnect the plug connection of the airbag key switch.
–  Disconnect the plug connection for the glove compartment light.
–  Detach hose for AC glove compartment.
Installing:
–  Installation is carried out in the reverse order.
  WARNING
Nobody should be in the vehicle when the battery is being connected.
Pay attention to the sequence when connecting the battery → Electrical System; Rep. gr.27.
  S70-0467

Removing and installing the central pipe > < Removing and installing the dash panel